|
|
|
| |
|
| |
Our
series of weight-controlled filling systems provides
accurate filling with approval for trade use for containers,
tins, pails carton or drums in the range of 10 to 3000
litres. They are suitable for installation in wash down,
hazardous and other hostile environments. Most suitable
for a wide range of liquids such as edible oil, motor
oil, chemical industrial oil, kerosene, ghee, shortening,
margarine, grease, glue, ink, paint etc. Up to viscosity
of non-freeing liquid. |
|
ED-2M-SS
Margarine Filler |
ED-2L-SS
Ghee Filler |
|
|
| |
|
|
Stand
alone or automatic models are available with automatic
feeding, assignment, filling, capping, seaming, labeling,
Ink Jet Printer, palletising. Filling of drums can be
in single drum or palletised loads, and may incorporate
complete drum-handling lines, including depalletising,
palletising, debunging, bunging, oversealing, environment
control enclosures, automatic weight checking, computer
control, data management etc.
|
|
| |
| Technician
Specifications |
Product
Type |
Tins
fill automatically with liquids such as edible oil,
motor oil, chemical products, industrial oil, kerosene
etc. or cartons fill with pastry products such as margarine,
ghee, shortening, coco butter, grease etc. |
Scale
Capacity/
Accuracy |
20
kg x 0.005 kg, 30 kg x 0.005 kg
50 kg x 0.01 kg, 100 kg x 0.02 kg |
Weighing
Platform |
Platform
complete with single point load cell, is ruggedly constructed
to take the abuse found in the harshest of industrial
environments. Platforms are overload-protected to several
times their maximum capacity. |
| Load
Cell |
Single
point load cell specifically designed and developed
for bench scale applications. Cell is protected against
moisture damage by Transeal II plus neoprene boot over
gaged area and secured by adhesive. No problems with
shock loading and of the overloading, mechanical stoppers
and provided at each corner platform. No other mechanical
linkages or moving parts and is unaffected by everyday
wear and tear. The design provide most accurate and
reliable operation. |
Pressure
Regulator |
Pneumatically
controlled flow control valve to control variation in
product supply pressure, pneumatically controlled. |
Nozzle
Assembly |
Full
stainless steel construction and integral with pressure
regulator for two stages fast/ slow filling. Entire
assembly is specially designed for easy removal for
cleaning. |
| Base
Frame |
Entire
base frame is of sturdy welded steel construction and
supports entire filling assembly, electronic and pneumatic
control unit. Hence, whole machine can be easily moved
from one location to another. |
Microprocessor
Control
System |
The
electronic control system ensures accurate weighing
process and also automatically controls the weight for
each weighing. The weight valves can be output to external
device for further data processing or recording. |
| Material |
Parts
in contact with the liquid are 316 stainless steel,
P.T.F.E. and PVC hose. |
| Cabinet |
All
electronic, pneumatic, filling and weighing stations
are neatly enclosed into a single cabinet complete with
clear plastic loackable, interlocked door for viewing
when closed and easily accessible when opened. All controls
are fully pretected from spillage tray located immediately
under the filling zone. Entire cabinet rest on adjustable
levelling feet. |
Supply
Pressure Feed |
Not
exceeding 0.8 kg/ sq.cm |
| Construction |
Robust
heavy steel re-infored mild steel construction ensures
long life. Model with SS are of stainless steel constructions. |
| Finish |
Prime
coat in red oxide anti-rust paint and finish with green
epoxy power paint. |
| Air
Supply |
6
– 7 kg/ sq.cm at 0.2 cu.m/ min, a filter-lubricator
unit is provided |
Electrical
Supply |
230
VAC + 10%, -15%, 50/ 60 Hz, single phase |
Ambient
Temperature |
-5
deg C to +40 deg C |
Operating
Humidity |
Less
than 85% RH (non-condensing) |
|
| |
|
 |
|
