|
|
|
| |
|
| |
| Standard
Drum Filler by weight |
Explosion-Proof
Drum Filler by weight |
|
|
The
EDF series of weight-controlled filling systems
provides accurate filling to the Department of
Trade and Industry Standards for containers in
the range of 10 to 200 litres and above. Weighing
systems integrated with the filling machine are
suitable for installation in wash down, hazardous
and other hostile environments. Operator safety
and efficient fulfillment of production requirements
are paramount. |
| |
| Most
suitable for a wide range of liquids that vary
widely in viscosity and foaming characteristics.
The range includes bung-entry filling for non-foaming
products, submerged filling for foaming and hazardous
products. Filling can be in single drum or palletised
loads, and may incorporate complete drum-handling
lines, including depalletising, palletising, debunging,
bunging, oversealling, environmental control enclosures,
automatic weight checking, computer control, data
management, etc. |
|
|
| |
It
is fully microprocessor controlled and contained
many sophisticated functions to fill drums to
desired weight accurately and efficiently. Designed
to fill directly from supply pump and coupled
with pressure regulator that activate near the
target weight, it fully ensure a clean and spillage
free operation with last drops collected by the
automatic drip tray. |
| |
| |
|
|
Pallet
Drum Filler by weight |
|
|
| Product
Specifications |
Standard
Features |
•
For open top drums and drums with bungholes
• Three stages coarse/ medium/ fine fill
• Three modes MANUAL/ NET/ GROSS fill
• Auto adjust NET fill and no tare GROSS fill
• Zero point check ensuring no drum no fill
• Auto adjust drum clamp assembly
• Below level filling for good accuracy
• Non-drip nozzle and automatic drip tray
• Overfill protection and spillage free with pressure
regulator
• Automatic nozzle rise and fall system
• Emergency stop to halt product flow
• Auto shut off and fail safe on power failure
• Automatic bung alignment protection
• Premature ascent interlock, to prevent the filling
head withdrawing
from the drum before the fill cycle is completed
• Stainless steel construction and PTFE material
on all wetted parts
• Heavy duty gravity roller conveyor on scale
platform
|
Technical
Specification |
Automatically
fill drum with liquids such as edible oil, motor oil,
chemical, industrial oil, kerosene, etc, up to viscosity
of 1600 centistroke or more at 40 deg C. Product temperature
can be to 100 deg C. |
Operating
Speed |
90
drums per hour for 210 litre drum based on water at
2 kg/ sq cm and 30 cu.m/ hr.
60 to 75 drums per hour depending on product. |
Scale
Capacity/
Accuracy |
0
- 300 kg x 0.1 kg Tare:
up to 300 kg
Scale display accurary is +/- 0.03% with an internal
accuracy of +/- 0.01%. |
| Load
Cell |
Single
point load cell specifically designed and developed
for bench scale applications. Cell is protected against
moisture damage by Transeal II plus neoprene boot over
gaged area and secured by adhesive. No problems with
shock loading and of the overloading, mechanical stoppers
and provided at each corner platform. No other mechanical
linkages or moving parts and is unaffected by everyday
wear and tear. The design provide most accurate and
reliable operation. |
Lance
Assembly |
304
stainless steel, 42 mm OD, telfon foot valve seat. |
Pressure
Regulator |
Pneumatically
controlled flow control valve to control variation in
product supply pressure, pneumatically controlled. |
| Base
Frame |
Sturdy
welded steel column supports entire filling assembly,
electronic and pneumatic control unit, and is mounted
to the base frame. |
Microprocessor
Control
System |
The
electronic control system ensures accurate weighing
process and also automatically controls the weight for
each weighing. The weight valves can be output to external
device for further data processing or recording. |
| Material |
Parts
in contact with the liquid are 304 stainless steel,
fluorosint, P.T.F.E. and PVC hose. All seals are chemical
resistant packing seal. |
Product
Pressure Feed |
Not
exceeding 2.5 kg.sq.cm |
| Finish |
Prime
coat in red oxide anti-rust paint and finish with green
apoxy power paint. |
| Net
Weight |
Approximately
400 kg. |
| Air
Supply |
6
– 7 kg/ sq.cm at 0.2 cu.m/ min, a filter-lubricator
is provided |
Electrical
Temperature |
-
5 deg C to + 40 deg C. |
Operating
Humidity |
Less
than 85% RH (non-condensing) |
| Options |
•
Entry and take away conveyor and tilting
• Depalletising and palletising system
• Labelling, coding and capping machines
• Pre-fill station for performance improvement
• Height-equalizing product hose suspension
• 316 stainless steel on all Wetted parts
• Gas enclosure hood
• Explosion proof version
• Management data systems |
|
|
 |
|
