| Technician
Specifications |
Product
Type |
Automatically
fill tins with liquids such as edible oil, motor
oil, chemical, industrial oil, kerosene solvent,
etc, up to viscosity of 1600 centistroke or more
at +40 deg C. Product temperature can be up to
+ 100 deg C. |
Operating
Speed |
700
– 750 tins per hour for 25 kg tins based
on water at 0.8 kg/sq cm and 3 cu.m/hr. |
Scale
Capacity/
Accuracy |
25
kg x 0.005 kg
Scale display accurary is +/- 0.025% with an internal
accuracy of +/- 0.01%. |
Weighing
Platform |
Size
0.2m x 0.2m complete with single point load cell,
platform scale is ruggedly constructed to take
the abuse found in the harshest of industrial
environments. Platforms are overload-protected
to several times their maximum capacity. |
| Load
Cell |
Single
point load cell specifically designed and developed
for bench scale applications. Cell is protected
against moisture damage by Transeal II plus neoprene
boot over gaged area and secured by adhesive.
No problems with shock loading and overloading,
mechanical stoppers and provided at each corner
of the platform. No other mechanical linkages
or moving parts and is unaffected by everyday
wear and tear. The design provide most accurate
and reliable operation. |
Pressure
Regulator |
Pneumatically
controlled flow control valve to control variation
in product supply pressure, pneumatically controlled. |
Nozzle
Assembly |
Full
stainless steel construction and integral with
pressure regulator for two stages fast/ slow filling.
Entire assemble is specially designed for easy
removal for cleaning. |
| Drip
Tray |
Automatic
drip tray to collect any residual drip. |
| Conveyor |
1
length 11.2m of variable speed SS.duplex motorized
slat band conveyor for tin and Jelly can feeding,
locating, filling and discharging. Entire length
of conveyor is filled with adjustable side guide
rails. The sensor for locating the container opening
and stopper for container positioning. |
Reservoir
Tank |
The
tank with a holding capacity of 1400 litres is
complete with HIGH/ LOW level sensors to automatically
control the open/ closing of product inlet valve
which is connected directly to the pump. |
| Base
Frame |
Entire
base frame is of sturdy welded steel construction
and supports entire filling assembly, electronic
and pneumatic control unit. Hence, whole machine
can be easily moved from one location to another. |
Microprocessor
Control
System |
The
electronic control system ensures accurate weighing
process and also automatically controls the weight
for each weighing. The weight valves can be output
to external device for further data processing
or recording. |
| Sequencing |
Auto
feed, locating, filling and discharging fully
micro-processor controlled with electronic sensing
device. PVC controller and touch screen. |
| Material |
Parts
in contact with the liquid are 316 stainless steel,
fluorosint, P.T.F.E. and PVC hose. |
| Cabinet |
All
electronic, pneumatic, filling and weighing stations
are neatly enclosed into a single cabinet complete
with clear plastic loackable, interlocked doors
for viewing when closed and easily accessible
when opened. All controls are fully pretected
from spillage tray located immediately under the
filling zone. Entire cabinet rest on adjustable
levelling feet. |
Supply
Pressure Feed |
Not
exceeding 0.8 kg/ sq.cm |
| Finish |
Stainless
steel 304 |
| Net
Weight |
Approximately
400 kg |
| Air
Supply |
6
– 7 kg/sq.cm at 0.5 cu.m/ min, a filter-lubricator
unit is provided |
Electrical
Supply |
380
– 440 VAC + 10%, -15%, 50/ 60 Hz, three
phase |
Ambient
Temperature |
-5
deg C to +40 deg C |
Operating
Humidity |
Less
than 85% RH (non-condensing) |
| Options |
•
Entry and take away conveyor and tilting
• Depalletising and palletising system
• Labelling, coding and capping machines
• Pre-fill station for performance improvement
• 316 stainless steel on all wetted parts
• Sanitary type for food industry
• Gas enclosure hood
• Explosion proof version
• Management data systems |
